|
" Development of a Flexible Pavement Design Protocol for the UAE Based on the Mechanistic-Empirical Pavement Design Guide "
Alalkim Alzaabi, Ammar
Romanoschi, Stefan
| Document Type
|
:
|
Latin Dissertation
|
| Language of Document
|
:
|
English
|
| Record Number
|
:
|
1052856
|
| Doc. No
|
:
|
TL51973
|
| Main Entry
|
:
|
Alalkim Alzaabi, Ammar
|
| Title & Author
|
:
|
Development of a Flexible Pavement Design Protocol for the UAE Based on the Mechanistic-Empirical Pavement Design Guide\ Alalkim Alzaabi, AmmarRomanoschi, Stefan
|
| College
|
:
|
The University of Texas at Arlington
|
| Date
|
:
|
2019
|
| Degree
|
:
|
Ph.D. C.E.
|
| student score
|
:
|
2019
|
| Note
|
:
|
118 p.
|
| Abstract
|
:
|
The Ministry of Infrastructure Development in the UAE has used the AASHTO 1993 Pavement Design Guide for the design of new flexible pavement structures for many years. An improved pavement design method, called the Mechanistic-Empirical Pavement Design Guide (MEPDG) was developed by AASHTO in their effort to update the empirical method used in 1993 Guide. The project was initiated by the National Cooperative Highway Research Program (NCHRP) 1-37A project. It is based on mechanistic-empirical analysis of the pavement structure to predict the performance of the pavements subject to pavement structure and materials, traffic and environmental conditions. The development allowed for more complex design concepts. The design approach used is different because the pavement design engineers can determine the damage sustained over the design life and changes of ride quality over time and thus adjust their design to serve specific requirements. Due to the advanced models used, the MEPDG is expected to be adopted for use in the United Arab Emirates in the near future. In order to improve the performance prediction of the models a local calibration is required to accommodate the local pavement materials, traffic characteristics and the environmental conditions. The objective of this study was to calibrate the latest version of the MEPDG, the AASHTOWare Pavement ME 2.5.5 software program to the local conditions of UAE. To achieve this, twenty flexible pavement sections were selected for the calibration process. The structural configuration, in-situ pavement performance, traffic and climate data was obtained from the Ministry of Infrastructure Development. AASHTOWare Pavement ME software runs were made using the nationally calibrated coefficients and the predicted rutting and IRI values were compared with measured values. The difference between the measured and the predicted distresses were minimized through calibration of the rutting and IRI models. A new set of local calibration coefficients (βr1, βGB, and βSG) for the rutting in the asphalt concrete, base and subgrade layer models were obtained. The calibration of IRI was done by deriving the appropriate model coefficients (C1 and C4) for the total rutting and the Site Factor. No calibration was conducted for the fatigue alligator cracking and transverse cracking since they very rarely develop in UAE pavement. However, the rutting and the roughness models were successfully calibrated.
|
| Descriptor
|
:
|
Civil engineering
|
| Added Entry
|
:
|
Romanoschi, Stefan
|
| Added Entry
|
:
|
The University of Texas at Arlington
|
| |