رکورد قبلیرکورد بعدی

" A new method of temporal phase shifting using principle of stroboscopy for characterizing microstructures "


Document Type : Latin Dissertation
Language of Document : English
Record Number : 53053
Doc. No : TL23007
Call number : ‭MR63123‬
Main Entry : Davoud Mohammad Ali Zadeh
Title & Author : A new method of temporal phase shifting using principle of stroboscopy for characterizing microstructures\ Davoud Mohammad Ali Zadeh
College : Concordia University (Canada)
Date : 2009
Degree : M.A.Sc.
student score : 2009
Page No : 104
Abstract : Temporal Phase Shifting Interferometry is the most common method for characterization of surface, profile and displacement properties of micro devices. Common methods of phase shifting require PZT based devices that have inherent errors due to non-linearity. To avoid these errors during phase shifting, a new phase shifting technique is presented in this work. A detailed analysis of the temporal phase shifting technique was performed and an optimized methodology for phase shifting was also established. This technique utilizes the advantage of stroboscopic interferometry to create phase shifted images without requiring any component for phase shifting. The feasibility of the proposed method of phase shifting was demonstrated using the developed Acoustic-Optic Modulated Stroboscopic Interferometer (AOMSI) on simple 1D and 2D micro structures designed specifically for this purpose. The proposed method was used for surface profiling and static characterization of the microstructures. Experiments were performed on microcantilevers in order to extract the curvature of the device due to residual stress on it. The same device was tested under a commercial surface profiler with 1Å resolution and the results were found to be in good agreement with the results from the proposed technique. Static characterization was performed to identify the tip deflection and profile variation of the microcantilever in response to various DC voltages. A capacitor-based cantilever was tested under varied electrostatic loads and the deflection of the cantilever was extracted using the proposed method. The deflection of the cantilever was predicted using a theoretical model based on energy method. Static characterization results from the proposed technique were found to be in good agreement with the predicted results. To extend the applicability of this technique without affecting the spatial resolution for micro devices larger than the field of view of the interferometer, stitching method was proposed and three different stitching configurations were also presented. The same device was tested in full-field of view under the commercial profiler. Good agreement between the result of presented stitching methods and commercial profiler demonstrates the reliability of the presented methods for stitching large structures.
Subject : Applied sciences; Mechanical engineering; 0548:Mechanical engineering
Added Entry : Concordia University (Canada)
کپی لینک

پیشنهاد خرید
پیوستها
عنوان :
نام فایل :
نوع عام محتوا :
نوع ماده :
فرمت :
سایز :
عرض :
طول :
MR63123_9763.pdf
MR63123.pdf
پایان نامه لاتین
متن
application/octet-stream
3.30 MB
85
85
نظرسنجی
نظرسنجی منابع دیجیتال

1 - آیا از کیفیت منابع دیجیتال راضی هستید؟